Taulman-T-Glase – Blue – 1.75mm *** 1lb spool ***

$30.00

t-glase (called TEE-GLASS) is an “optically correct” or water clear polymer that comes in Clear, Red, Green, Blue, White, Black, and Aqua.  Red, Green, Blue, and Aqua are translucent rather than opaque.  t-glase is a food and beverage safe polymer and carries the recycle rating of “1”.  t-glase is one of the lowest shrinkages of the polyesters.  With optical coatings, the t-glase can appear as clear as a glass part.  t-glase prints at 235-245C.  One can easily print light guides or light pipes. T-glase comes in Clear, White, Black, Red, Green, Blue and Aqua.

Specs:

t-glase – colors = Clear, Red, Green, Blue, White, Black  and Aqua
Print temp = 238C – 245C
Nozzle = any size
Print speed = ABS speeds – slower for high detailed prints
Retraction =  3-4mm
Print bed =   Hot = Glass heated to 45C with a coat of PVA
NOTE:  It is best “NOT” to let the bed cool to ambient, but only down to 35C in “end-of-g-code”.
This will reduce glass breakage

5 in stock

Category: Specialty Filaments Tags: 1lb, 2.85mm, 3D, 3D Printer, 3D Printer Filament, 645, Bridge, Filament, Green, Nylon, PLA, Printer, Red, T-Glase, Taulman, Yellow